ISO-DRAIN 8 MESH is a specialty dimpled sheet from INTERPLAST used for damp control in walls of basements and other below-ground structures.
Installed over the damp underlying wall surface, the dimpled sheet creates a continuous air gap for free air circulation behind the plaster or render finish. The integrated plastic mesh on the side facing the plaster ensures efficient bonding.
Benefits:
Optimum insulation of damp rooms
Ensures continuous air circulation
and permanent damp control in wall
Provides an excellent bonding surface
for plasters, render coats, etc.
Keeps plaster and/or wallpaper dry
Technical Data:
Material
· Dimpled sheet:
· Mesh layer:
HDPE for damp control
HDPE twis-woven in walls
Colour
· Dimpled sheet:
· Mesh layer:
transparent
transparent
Thickness
· Dimpled sheet:
· Mesh layer:
apprx. 0.7 mm
Sheet
width:
2.0 m
Grid
size of mesh:
apprx. 5 mm
Area
weight:
apprx.
700 g/m²
Dimple
height:
8
mm
Dimple
spacing:
apprx.
1,150 per m²
Air-gap
(between dimples):
apprx.
5.5 l/m²
Compressive
strength:
apprx.
150 kN/m² (15 t/m²)
Service
temperature range:
-40 °C
to +80 °C
Physiological
properties:
non-polluting for drinking water
INTERPLAST dimpled sheet products are resistant to a wide range of chemicals, impervious to root penetration, rot-proof and unaffected by soil bacteria and fungi. INTERPLAST premium-quality dimpled sheet products conform to applicable EN and national standards. Installation should be done using only original
accessories.
