ISO-DRAIN 10 GEO PLUS
Protective Sheet for
Elastic Waterproofing
|
|
 |
|
| ISO-DRAIN 10 GEO PLUS is a new dimpled sheet product from INTERPLAST
for protection of waterproofing on foundation walls.
|
|
|
|
|
|
| Elastic waterproofing on outer wall surface (must be shielded from rocks, sharp-edged debris etc.) |
Slip film, allows dimpled sheet to move in
response to backfill settlement, avoiding damage to waterproofing |
ISO-DRAIN 10 sheet with 10 mm dimple
tex-
turing, specially engineered to provide high strength and
ex-
cellent drainage |
Geotextile mat, filters out soil particles to prevent obstruction of air gap between dimples, ensuring controlled drainage performance |
|
|
|
| Benefits:
|
|
- Allows movement of dimpled sheet to accommodate settlement
- Protects the waterproofing from physical damage
- Easy handling, rapid installation of all three layers in one operation
- Rugged, provides thermal insulation
- Ensures controlled drainage
- Close dimple spacing (approx. 3,360 per m²) provides excellent compressive strength (400 kN/m²)
- 10 mm high dimples provide ample drainage capacity
|
|
|
|
|
|
|
Technical Data:
|
|
|
Material
· Dimpled sheet:
· Geotextile:
· Slip film: |
LDPE
PP
LDPE |
Colour
· Dimpled sheet:
· Slip film: |
black
black |
Thickness
· Dimpled sheet:
· Geotextile:
· Slip film: |
apprx. 600 g/m²
136 g/m²
160 µm |
| Sheet
width: |
2.0
m |
| Area
weight: |
apprx.
900 g/m² |
| Dimple
height: |
10
mm |
| Dimple
spacing: |
apprx.
3,360 per m² |
| Air
gap (between dimples): |
apprx.
7.9 l/m² |
| Drainage
capacity: |
apprx.
4.8 l/s/m
apprx. 288 l/min/m
apprx. 17,300 l/h/m |
| Transmissivity
of geotextile mat: |
apprx.
100 l/m²/s |
| Compressive
strength: |
apprx.
400 kN/m² (40 t/m²) |
| Service
temprature range: |
-40 °C
to +80 °C |
| Physiological
properties: |
non-polluting
for drinking water |
|
|
|
|
INTERPLAST dimpled sheet products are resistant to a wide range of chemicals, impervious to root penetration, rot-proof and unaffected by soil bacteria and fungi. INTERPLAST premium-quality dimpled sheet products conform to applicable EN and national standards. Installation should be done using only original
accessories.
|
|
|
|
|
|
|
|
|
